Windows 3.1 Internet Setup Sheet

NOTE: This setup sheet assumes you have a properly installed and working modem.

1. Go into Windows by typing WIN at your DOS prompt.
2. Insert the disk provided by Preferred Systems into your floppy drive.
3. Click on the FILE menu and go down to RUN.
4. In the box type in A:\SETUP.EXE (or B:\SETUP.EXE if your floppy is b drive).
5. When the Preferred Systems Internet Services screen comes up click the "Continue" button.
6. On the next screen you can enter a place to install the software. It is recommended that you leave it like it is.
7. When the "Destination Group" screen comes up just click on "Continue".
8. The setup program will now copy files to your computer.
9. Click on the "Preferred Systems" group in the Program Manager.
10. Double click on the WINSOCK icon.
11. Click on the FILE menu and go down to SETUP.
12. Find the SLIP Port box on the screen that comes up.
13. Enter the COM Port of your modem in the SLIP Port box (this should be either 1, 2, 3, or 4).
14. Click the OK button and the go to the FILE menu and go to EXIT.
15. Double click on the WINSOCK icon again.
16. Click on the DIALER menu and thne go down and click on SETUP.CMD.
17. When the Telephone Number box comes up enter one of the following from our listing Pop Locations and Numbers.